“Simply Select IZOKEE: Your skilled for Micro-Electronics! One-Cease-Purchasing with Varied Digital Modules & Parts! “
IZOKEE RFID Package, RFID-RC522 RF IC Card Reader Sensor Module with S50 Good Card and Key Rings
About RC522 chip
– MFRC522 is a extremely built-in learn and write chip which is relevant to 13.56MHz contactless communications.
– It’s a non-contact learn and author card chip, low voltage, low value and small measurement, is a more sensible choice for good meters and moveable handheld gadgets improvement.
– MF RC522 fully built-in in all kinds of 13.56MHz passive contactless communication strategies and protocols.
– Assist 14443A suitable transponder alerts. The digital half handles ISO14443A framing and error detection. As well as, assist quick CRYPTO1 encryption algorithms, terminology validation MIFARE merchandise.
– MFRC522 assist MIFARE sequence of high-speed non-contact communication, two-way information transmission price as much as 424kbit/s.
– As a extremely built-in 13.56MHz card reader new household of chips, there are various similarities between MF RC522, MF RC500 and MF RC530, but in addition have many variations. Communication between it and the host SPI mode helps to cut back the connection, scale back PCB board measurement and price.
Working present :13-26mA/DC 3.3V
Idle present :10-13mA/DC 3.3V
Sleep present: <80uA
Peak present: <30mA
Working Frequency: 13.56MHz
Learn Vary: 0 ~ 35mm (mifare1 card)
Module interfaces SPI: Information switch price most 10Mbit/s
Package deal Included:
1 x RFID-RC522 Module
1 x S50 Clean IC Card
1 x S50 Key Ring
1 x Straight pins
1 x Curved pins
5 x Further Key Rings
Make certain this fitsby coming into your mannequin quantity.
This RFID-RC522 module relies on the Philips MF522-AN board and is delivered along with an S50 card, key Ring and two matching pin strips. Furthermore, 5pcs Further Key Rings as Present!
It’s relevant for the customers who have to design or manufacture the RF card terminal, for instance, the event of entry controls, digital door locks or terminals for the time recording.
It’s supported card sorts: Mifare1 S50, Mifare1 S70, MIFARE Ultralight, Mifare Professional, and MIFARE DESFire.
This module could be straight loaded into the varied reader molds. It may be used with Arduino, Raspberry Pi and micro-controller.
The module makes use of a voltage of three.3V. It may be linked communication with person’s any CPU main-board by way of a number of strains of SPI interface; it may well guarantee secure and dependable work, and reader distance.